This guide will help you set up Comeen on a Crestron tablet, utilizing a laptop for configuration through the device's interface.
Pre requisites
The Crestron tablet requires a single Ethernet cable for both power and data connection.
Once the Ethernet cable is connected, the tablet will automatically power on.
The Crestron needs to be connected to the same network as the laptop you will use for the setup.
ℹ️ Information: The initial boot may take up to two minutes with the Crestron room scheduling application selected by default.
Table of Contents
Step 1: Access the Tablet Interface via Laptop
Access Setup Screens:
To access the setup screens, place five fingers on the display and hold for 15 seconds until the main Setup screen appears.
Find the Touch Screen IP Address:
Ensure the touch screen is connected to the network.
The Setup screen shows the IP address
Access the Interface via Browser:
Enter the touch screen IP address into a web browser on your laptop to access the web configuration interface.
ℹ️ Information: You can also set up XiO Cloud and XiO Cloud Premium for enhanced management and control options.
Step 2: Configure Tablet Settings via Laptop
Create an Admin account:
Follow the on-screen instructions to create an admin account if prompted. This may involve setting up a username and password for future access to the configuration settings.
Set the time zone:
Navigate to the settings section
Ensure the date and time settings are correct to avoid any synchronization issues.
Set up an NTP Time Server:
Under the same tab, add an NTP Time server. You can use a private NTP or a public one, such as http://time.google.com/, for example.
Review other settings:
Go through the remaining settings in the interface to ensure everything is configured according to your requirements.
Select Save Changes from the Action menu
Step 3: Install the Comeen Application
Access the application tab:
In the same Settings tab, find and select the Application section.
Select Application:
Enter the following URL to download and configure the Comeen application: https://display.dynamicscreen.xyz/golem/?model=crestron-tss
Select Save Changes from the Action menu
Install the Application:
Follow the on-screen instructions to download and install the Comeen app on your Crestron tablet.
Restart the Tablet:
Once the installation is complete, restart the tablet.
Run the Comeen App:
After rebooting, the Comeen application should automatically run. Verify that it launches and operates as expected. You should see a pairing screen like this one :
Step 4: Associate Crestron with your Comeen Account
Log in to Comeen:
On a computer or mobile device, log in to your Comeen interface at https://login.new.play.comeen.com
Navigate to Displays:
Go to the Displays section and click on "Associate a player".
Enter the Code:
Enter the code displayed on the Crestron tablet screen to associate it with your Comeen account.
Finalize Setup:
Confirm the association to complete the setup. You are now ready to deploy your meeting room signage.
ℹ️ Information: For more detailed information on the Crestron tablet, here is Crestron's Product Manual.
By following these steps, your Crestron tablet should be successfully set up with the Comeen.