Humly Room Displays are managed through Humly Cloud. Comeen runs on Humly devices through the built-in Fullscreen signage mode, which loads the Comeen player URL on the device.
Prerequisites
A Humly license that includes a Signage Mode URL
A Humly device enrolled on Humly Cloud
Admin access to your Humly Cloud workspace
Humly firmware 2.4.1.0 or later installed on the device
Step 1 - Verify the firmware version
Open Humly Cloud.
Select the target device.
Locate the firmware version in the device details.
ℹ️ Firmware version 2.4.1.0 or later is required. If your device is running an earlier version, please upgrade the firmware on your Humly device.
Step 2 - Enable Fullscreen signage mode on the room
In Humly Cloud, go to Resources > Room Settings.
Select the room linked to your Humly device and click Edit selected.
Scroll to the Signage mode section.
Enable Fullscreen signage mode.
In the Fullscreen URL signage mode field, enter:
https://display.dynamicscreen.xyz/golem/?model=humly
7. Save the room settings.
Step 3 - Verify the deployment
After saving, the Humly device should reload and load Comeen in fullscreen within a few seconds.
If the device is already assigned to a Comeen display in your Comeen admin, the configured content will start playing automatically.
Otherwise, a pairing code will be prompted. You need to use this code to associate the display on your tenant